Water Fuel Gas Tank Port Inlet Outlet Circular Seam Welding Machine Automatic Arc Welding Machine

• Customization: Available
• Cooling Way: Air or Water Cooling
• Shielding Gas: Argon or CO2 or Mixed
• Model NO.: NZC-C1600
• Control: Automatic
• Frequency Range: Based on Custmers Requirement
• Electric Current: AC
• Customized/OEM: Ok
• Protetcion Shield Case: Yes or No as Required
• Welding Material: Stainless Steel Aluminum Cast Iron Steel Cooper
• Welding Seam Type: :Square, Circumferenc/Girth/Circular, Longitudinal
• Welding Torch Quantity: One or Two or More as Required
• Transport Package: Fumigation Woodern Box
• Specification: 3000*1500*1800mm or as design
• Trademark: Haoyu
• Origin: China
• HS Code: 8515319900
• Production Capacity: 500set/Year

Product Description

Water Fuel Gas Tank Port Inlet Outlet circular seam welding machine Automatic Arc Welding Machine

I. Application

Complete nozzle circular seam welding. Melting thickness and width will be able to reach welding

requirement. With uniform and smooth welding appearance.

MIG welding with wire feeder.

Ensure no-leakage and to prevent air leakage.

Machine can work continuously for 24-hour.

II. Technique Parameters

Applicable welding length :according to drawing

Applicable material :Stainless steel,carbon steel

Rotation speed :1-8r.p.m

Air pressure :0.4-0.6MPa

Welding gun adjustment :30mm (up&down, left&right)

Rotation degree :30°~50°

Welding power source :AOTAI NBC 500

Machine working voltage :380v 3phase 50hz for welding power source

220v single phase 50hz for main machine

III. Machine Structure

1.In order to meet welding requirement, welding torch can be adjusted up and down(cylinder driven),

side to side and angled turn (servo motor driven). They maximize throughout, and welding deformation

can be reduced significantly

2. Japan OMRON PLC and touch screen are used to control the whole machine. With the help of touch

man-machine interface, welding mode and specification can be preset,stored and retrieved. Welding

original point can be auto-detected. Welding torch will go to mechanical point after finishing the seam

3. Push-type wire feeder works stably. Machine is with high welding voltage and slow wire feeding

performance, which guarantees reliable arc igniting. Machine is also with low welding voltage and low

welding current for filling crater

4. We will arrange jig and fixture for your workpiece. Take right position of workpiece. Get center of

bottom.

5. AOTAI NBC 500 welding power source. 1set power source and 1set water chiller will go with

machine

IV.Sales Term              

• Payment term: 30% T/T advance along with the purchase order, balance should be cleared before delivery
• Delivery time: 45 days on receipt of payment in advance
• Guarantee: 12 months for the whole machine

V. Company introduction :

Jinan Haoyu Automation system Co., Ltd (another name is Jinan Haoyu CNC Machinery Co., Ltd) is a high-tech private company located in Jinan City ,Shandong province. We have been a professional manufacturer in the field of welding automation over 17 years.
Our products mainly include automatic welding machine, robot welding station, automatic pipe cutting machine, automatic material handling equipment, automatic assembling machine,these machines are widely used in the areas of automobile,construction machinery, railway vehicle, electric power, shipbuilding, pressure container, petrochemical, house appliances and military industry, etc.
We established a long-term cooperative relationship with more than 60 countries and regions, such as Canada,Italy,Australia,United States,India,south America.Our welding machines are recognized by customers with quality and excellent service.the company have obtained CE and ISO certification .
With strong R&D staffs and Strict QC&QA team,so can design and produce as customers' requirements.Our sales team provide perfect support from Pre-sale and after-sale, in-sale.Technology Improvement and perfect products are the eternal pursuit of the company.
Welcome to Visit us at any time!


VI.Service support :
We have always been committed with the service idea of customer-centric, supply Installation, adjustment, training and maintenance in pre-sales and after-sales service.
1. Pre-sales Service                                            
Before signing contract, customers can get production plan, technical consultant and equipment suggestion and etc.
2. Training service                                                 
Customers can get free technical training in China factory. Mainly training are Training for machine,Basic daily cleaning and maintenance for the machine,Solutions for common hardware problems
3. Equipment Maintenance                                     
One year free maintenance, lifelong caring,Free technical consultant,Customer service responding in 2 hours
4.Pre-shipment inspection system:
4.1 According to the customer's shipping details, we will check the products size, weight, spare parts, protective film and other information one by one for each invoice of goods. If there are any doubtful goods before delivery, quality inspectors will open the package in time and inspect the goods through professional testing equipment to ensure the accuracy of delivery.
4.2.The outer packaging of each goods will also be checked, such as whether the packing is damaged, whether the wooden pallet is fumigated, whether the exported goods are packed with steel strips,etc. To ensure that the goods are not damaged during loading and unloading.
Transportation ways : To central Asia, we use railway transport. To other countries, we choose sea transport. But all the products loaded on the containers.
5 .Afer sale service system
5.1 After our customer having received goods, if there are problems caused by the transportation of materials, we would let the customer take photos before unloading, give feedback to the freight forwarder, and make insurance compensation.
5.2. After customers received the goods, if there some quality problems ,production problems. If it is confirmed that there are indeed quality problems.Our QA and QC managers and relevant responsible department will give the reasonable compensation content based on the business contract . 
5.3 Our Technology support team will provide on-line training or site training (engineers go to customers 'factory site ) as customers need
6.Warranty :uausally is one year ,also can be 2~5years as customers requirement

VII.FAQ
Question 1 :How to customized a automatic welding machine for your workpiece ?
Answer: Please tell us below information ,then we can design for your workpiece:
1.1  the material of your workpiece
1.2 ,the length ,width,thickness of your workpiece or send the drawing of workpiece ,if there are different size workpiece ,tell us the range (Min and max )
1.3 it is better to give us the Workpiece real picture .
Question 2: What is the core components of automatic welding machine ?
Answer : based on different Automatic welding machine,there are mainly including PLC ,CNC control system,inverter ,servo motor with driver ,welding power source,.welding torch ,robotic .pneumatic control system.
Question 3:Is possible to design Multi-station with more welding torch ?
Answer :yes ,it is ok we can design one torch or two torch or more welding torch work station to increase
Question 4: What is the brand of the core components in the automatic welding machine
Answer :All core components are famous china brand or international brand ,such as :Welding power source ,we usually use OTC and Panasonic brand.if you need Lincoln welding power source or Miller Lincoln welding power source is ok ,we also can use it on our welding machine .
For PLC : We usually use Omron and Siemens PLC, Customers can specify the brand
For robot :We usually use OTC ,YASUKAWA ,ABB or kuka ,or Customers can specify the brand.
Question 5:How many kinds of our Welding machine ?
Answer:
Based on welding power source : there are automatic TIG welding machine ,automatic MIG welding machine ,automatic submerged arc welding machine(automatic SAW machine)
Based on application : there are Automobile parts welding machine,Automatic scaffordding welding machiine ,pipe to flange Automatic welding machine ,Tank Automatic welding machine,Hydraulic cylinder piston rod Automatic welding machine,wheels Automatic welding machine and so on .
Based on welding seam type : circular/girth seam welding machine ,longitudinal /straight seam welding machine ,Square seam welding machine.irregular seam welding machine
Question 6: Is it possible to extend Warranty time ?
 Answer: Yes,our warranty time usually is 1 year for free ,but can be extended as required ,the price is a little expensive .no matter how long the warranty time ,our After-sale service is lifelong .

IX.CE Certificate


IX. Package 
1.Normally we will use fumigation plywood case for packaging; for some big machine, we can use steel pallet and plastic filme cover.All machines are paint with anti rust paint or oil before leaving factory.
2.Package can be as customers' requirement