Hydraulic Cylinder Oil Port Welding Machine
Hydraulic Cylinder Oil Port Welding Machine Feature
1.Welding torch tilts to a certain angle, can be adjusted up-down, side to side and angled turn. workpiece is fixed while the welding torch is rotating.
2.Fixture is used to form workpiece center, to guarantee welding seam position does not deviate. Do not need spot welding in advance.
3.Machine has high voltage and slow wire feeding performance, which guarantees reliable arc igniting. It also has low welding voltage and low current for filling crater.
4.It adopts shot-distance wire feeding mode.
5.Using PLC to control the whole operation. CNC system is used to control rotation of machine head. Servo motor is driven by AC driver.
6.The rotatory head is moved up and down by servo motor, rotary head falls while machine is welding, and lifts while loading and unloading.
Hydraulic Cylinder Oil Port Welding Machine Parameter
Welding torch rotary speed |
0.5-5r.p.m stepless adjustment |
Motor power |
0.4KW |
Welding torch dip angle |
±30° |
Welding torch up-down fine tune |
50mm |
Welding torch left-right fine tune |
50mm |
Applicable nozzle diameter |
φ30-φ100mm |
Applicable workpiece length |
300-2000mm |
Production efficiency |
1pc/min |
Hydraulic Cylinder Oil Port Welding Machine Service
Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 100.00 USD per person, per day.
Certification:
Related Product