LPG Cylinder Tank Submerged Arc Automatic Welding Machine
LPG Cylinder Welding Machine Feature
1.The welding torch is fixed; the work piece rotating, welding position is horizontal
2.The work piece rotation is driven by clamping, roller bearing bracket
3.The torch is adjustable along the longitudinal beam, adaptable to various welding
4.The torch can be adjusted up and down, left and right, dip angle, in order to meet the welding requirements.
5.The work piece rotation adopts AC inverter speed control, speed adjustable.
LPG Cylinder Welding Machine Parameter
| Welding cylinder diameter |
200-750mm |
| Welding cylinder length |
200-1000mm |
| Rotation speed |
0.2-2m/min |
| Motor power |
0.75kw |
| Air compressor |
0.4-0.6MPa |
| Machine rapid speed |
2m/min |
| Welding torch left-right adjust |
50mm |
| Welding torch up-down adjust |
50mm |
| Welding wire diameter |
Φ 3-6mm |
| Machine working voltage |
380V 3phase 50hz |
LPG Cylinder Welding Machine Service
Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 100.00 USD per person, per day.
CE Certification:
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}