China Factory production Automatic Circular Seam Welding Machine for Scaffolding Ringlock
Youtube link of our Automatic welding Machiner :
Gas tank circular seam automatic welding: https://haoyucnc.en.made-in-china.com
Hydraulic cylinder oil port automatic welding:https://haoyucnc.en.made-in-china.com
Square pipe flange automatic welding:https://youtu.be/bV0ioU2QwiA
Automatic longitudinal seam welding machine:https://haoyucnc.en.made-in-china.com
I Welding machine for 6 rosettes.
- MIG welding type.
- Fixing the ringlock components in the fixtures by hand → manually load the pipe. Pipe will be held by rotary chuck.
- Spot/tack welding pipe and rosettes automatically.Next, machine will finish full welding automatically.
- At last, cylinder device will automatically push pipe to table, and finish unloading process
II Technique Parameters
| Pipe diameter |
48.3mm |
| Welding length |
Max 3m |
| Welding speed |
450-600mm/min |
| Welding type |
MIG: 100% CO2
MAG: 82% Argon+ 18% CO2 |
| Control system |
Japan OMRON PLC and torch screen |
| Loading capacity |
800KG |
| Air pressure |
0.4-0.6MPA |
| Rotation degree |
360° |
| Welding power source |
China AOTAI (NBC-350) |
| Machine working voltage |
415v 3phase 50hz |
III. Machine Structure
1. There are total 12pcs welding torch for welding circumferential seam. Welding torch can be adjusted up and down, side to side and angled turn. They maximize throughout, and welding deformation can be reduced significantly.
2. Japan OMRON PLC and torch screen are used to control the whole machine. With the help of touch man-machine interface, welding mode and specification can be preset,stored and retrieved. There will be fault alarm and indication during welding process, such as stuck wire, blocked wire, etc.
3. Push-type wire feeder works stably. Machine is with high welding voltage and slow wire feeding performance, which guarantees reliable arc igniting. Machine is also with low welding voltage and low welding current for filling crater.
4.Easy clamping and releasing rotary chuck.
5. Pipe will be fed into welding stage manually.
6. Brass/copper block as the conductive device (electric conduction) which directly connects with welding source. It is a basic security design.
7. China AOTAI power source: the arc is stable, which controls heat input for good penetration and reduced spatter and smoke. 12 sets welding source will go with machine.
8. Machine base is made of cast iron and thick steel tube.
IV Sales Term
- Payment term: 30% T/T advance along with the purchase order, balance should be cleared before delivery
- Delivery time: 45 days on receipt of payment in advance
- Guarantee: 12 months for the whole machine
V Company introduction :
Jinan Haoyu Automation system Co., Ltd (another name is Jinan Haoyu CNC Machinery Co., Ltd) is a high-tech private company located in Jinan City ,Shandong province. We have been a professional manufacturer in the field of welding automation over 17 years.
Our products mainly include automatic welding machine, robot welding station, automatic pipe cutting machine, automatic material handling equipment, automatic assembling machine,these machines are widely used in the areas of automobile,construction machinery, railway vehicle, electric power, shipbuilding, pressure container, petrochemical, house appliances and military industry, etc.
We established a long-term cooperative relationship with more than 60 countries and regions, such as Canada,Italy,Australia,United States,India,south America.Our welding machines are recognized by customers with quality and excellent service.the company have obtained CE and ISO certification .
With strong R&D staffs and Strict QC&QA team,so can design and produce as customers' requirements.Our sales team provide perfect support from Pre-sale and after-sale, in-sale.Technology Improvement and perfect products are the eternal pursuit of the company.
Welcome to Visit us at any time!
VI Service support :
We have always been committed with the service idea of customer-centric, supply Installation, adjustment, training and maintenance in pre-sales and after-sales service.
1. Pre-sales Service
Before signing contract, customers can get production plan, technical consultant and equipment suggestion and etc.
2. Training service
Customers can get free technical training in China factory. Mainly training are Training for machine,Basic daily cleaning and maintenance for the machine,Solutions for common hardware problems
3. Equipment Maintenance
One year free maintenance, lifelong caring,Free technical consultant,Customer service responding in 2 hours
4.Pre-shipment inspection system:
4.1 According to the customer's shipping details, we will check the products size, weight, spare parts, protective film and other information one by one for each invoice of goods. If there are any doubtful goods before delivery, quality inspectors will open the package in time and inspect the goods through professional testing equipment to ensure the accuracy of delivery.
4.2.The outer packaging of each goods will also be checked, such as whether the packing is damaged, whether the wooden pallet is fumigated, whether the exported goods are packed with steel strips,etc. To ensure that the goods are not damaged during loading and unloading.
Transportation ways : To central Asia, we use railway transport. To other countries, we choose sea transport. But all the products loaded on the containers.
5 .Afer sale service system
5.1 After our customer having received goods, if there are problems caused by the transportation of materials, we would let the customer take photos before unloading, give feedback to the freight forwarder, and make insurance compensation.
5.2. After customers received the goods, if there some quality problems ,production problems. If it is confirmed that there are indeed quality problems.Our QA and QC managers and relevant responsible department will give the reasonable compensation content based on the business contract .
5.3 Our Technology support team will provide on-line training or site training (engineers go to customers 'factory site ) as customers need
6. OEM is ok
7.Warranty :uausally is one year ,also can be 2~5years as customers requirement
VII Package
1.Normally we will use fumigation plywood case for packaging; for some big machine, we can use steel pallet and plastic filme cover.All machines are paint with anti rust paint or oil before leaving factory.
2.Package can be as customers' requirement
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}